Houston Gate Repair - Automatic Driveway Gate Service Pros

Iron gate repair houston

Repair / July 26, 2017

Recent Job Requests for Repair or Weld a Wrought Iron Fence Contractors in Houston, Texas:

Project Location: Houston, TX 77004

Request Stage: Ready to Hire

Desired Completion Date: Within 1 week

What kind of location is this?: Home/Residence

Historical Work: No

Property Owner: Yes

Comment: Need to install a 2 by 2 wrought iron post. Just one. Nothing is attached to it. The one its replacing was cut to the concrete by accident. So, the cut one needs to be removed and replace by new one, OR an adapter used and welded to the original.

Project Location: Houston, TX 77024

Fence height: 6-8 feet

Desired Completion Date: Timing is flexible

Project Location: Houston, TX 77095

Kind of Repair Needed: Post is damaged, Post is wobbly, Fence is damaged, Fence is rusty, Fence is loose, Hardware is damaged/broken/missing

Fence height: 4-6 feet

Comment: I would like to walk the iron fence with you to plan the repairs, replacement, and changes together.

Kind of Repair Needed: Post is damaged, Post is wobbly, Fence is damaged, Fence is rusty, Fence is loose, Gate is sagging, Hardware is damaged/broken/missing

Request Stage: Planning & Budgeting

Project Location: Houston, TX 77019

Comment: I need a price for a metal gate to be bolted down and realign it.

Date: 07/2017

Kind of Repair Needed: Fence is rusty, Hardware is damaged/broken/missing, Other

What kind of location is this?: Business

Comment: we are needing our entry and exit wrought iron gates repainted along with a few other small areas. We are also needing some welding done on our walk-thru gate and a spring replaced so that the iron door springs closed properly.

Project Location: Houston, TX 77057

Nature of Project: Repair existing fence

Fencing material: Wrought Iron

Length of Fence: Less than 100 feet

Comment: I have a gate that the hinge rusted off. Multiple gates that don't line up. Decorative pieces on two gates that are rust out. Two more gates that the slide latches are completely rusted away. I also need some post tops that stop the water from getting into the fence posts. 2 1/2" posts.

Project Location: Houston, TX 77089

Kind of Repair Needed: Hardware is damaged/broken/missing

Project Location: Houston, TX 77003

Kind of Repair Needed: Fence is damaged, Fence is loose, Gate is sagging

Fence height: Greater than 8 feet

Project Location: Houston, TX 77025

Kind of Repair Needed: Other

Fence height: Less than 4 feet

Project Location: Houston, TX 77096

Comment: The latch on our iron side gate keeps snapping. We have had the piece welded back together but it broke at the same location fairly soon after.

Desired Completion Date: 1 - 2 weeks

Comment: Repair or Weld a Wrought Iron Fence - For Business

Kind of Repair Needed: Gate is sagging, Other

Project Location: Houston, TX 77069

Kind of Repair Needed: Post is damaged

Comment: I have metal gates between the driveway and the porte a cohere that leads to the back yard and garage, One of the posts has rusted at the base and the weld has broken. The post is approx 3 to 4 inches square . It needs repair. I can send a photo of the damage if needed.

Source: www.homeadvisor.com

CATEGORIES